SINEAXTI807直流信号隔离器用于电气隔离模拟DC信号，并将其转换为电流信号或电压信号，这取决于所使用的信号隔离器的型号；不需要辅助能源，因此不需要多余的电线，也可以进行电流分离，并能从直流信号中获得所需的少量辅助能量。SINEAXTI807系列隔离器可以对正常信号的电流或电压进行输入并输出，精度高，可用于单回路和多回路的信号隔离，很多可接3个电路，宽度为17.5mm内可达到3个信道，可以分离出具有爆炸危险的区域的信号，直流信号隔离器包括直流斩波器Z、隔离级T、整流器G和振荡器O。

SINEAXTI807直流信号隔离器参数

[EEx ia]IIC型直流信号隔离器

可以独立输出信号

Description	Climatic rating	Output signal	Order Code	Order No.
Passive DC signal isolator, [EEx ia] IIC input signal non intrinsically safe 0 … 20 mA output signal intrinsically safe with 1 isolation and transmission channel	standard	0 … 20 mA	807-56100	999 170

SINEAXTI807直流信号隔离器规格说明书

Description		*Blocking code	no go with blocking code	Article No./ Feature
SINEAX TI 807- Order Code 807-xxxx x				807 –
Features, Selection
1.	Mechanical design			1
	Housing S17
2.	Version			1
	Standard (non-Ex), input and output(s) non intrinsically safe
	[EEx ib] IIC, input signal(s) intrinsically safe			2
	[EEx ia] IIC, output signal(s) intrinsically safe			6
3.	Number of isolation and transmission channels	A		2
	2 channels (interface)
	3 channels (interface)	B		3
4.	Output signal(s) A or A1 and A2 or A1, A2 and A3
	0 … 20 mA			0
	0 … 10 V, 2 channels		B	2
	0 … 10 V, 3 channels		A	3
5.	Climatic rating
	Standard climatic rating			0
	Improved climatic rating			1