Calibrator

Crystal M1 digital pressure gauge


Economical and accurate!

M1 digital pressure gauge can maintain 0.2% reading accuracy at -10~50 DEG C, and is not affected by the factors such as drop, overpressure, vibration, temperature and rapid pressure change. Available as a 30 psi pressure gauge.

A wide range M1 digital pressure gauge with a reading accuracy of 0.2% can replace up to five mechanical pressure gauges with a reading accuracy of 0.25%.

• 2 recommended calibration cycle

Battery 3 years of continuous use time

Backlight display

Large fonts are easier to read

Including protective sleeve

• wear all on a replaceable CPF adapter

option

-BSP G B parallel pressure joint

-M20 M20 1.5 x adapter CPF adapter

3504 G B parallel fitting copper washer

-N CPFNPT connector kit (part number 4013) includes MPF-1/8QTF, MPF-1/4QTF and MPF-1/2QTF)

B absolute pressure - suitable for the rated pressure of 2000 psi or above. Add B to the unit, which means an absolute ruler (e.g. 2KPSIBXP2I).

Pump system A and B, Crystal M1 digital pressure gauge

System A

AHX includes a T-970 gas operated pump (0 to 580 psi / 40 bar)

AXX includes a T-960 gas operated pump (0 to 30 psi / 2 bar)

Pump system A and B, Crystal M1 digital pressure gauge

System B

BHX includes a T-975 gas operated pump (-25 inHg to 580 psi / -0.91 to 40 bar)

BXX includes a T-965 gas operated pump (-25 inHg to 30 psi / -0.91 to 2 bar)

Pump system C, Crystal M1 digital pressure gauge

System C

CHX includes a T-620H gas operated pump (0 to 5000 psi)

CXX includes a T-620 gas operated pump (0 to 3000 psi)

Pump system D, Crystal M1 digital pressure gauge

System D

DOX includes a P-018 hydraulic screw pump (0 to 5000 psi for oil)

DWX includes a P-018 hydraulic screw pump (0 to 5000 psi for water)

Pump system E, Crystal M1 digital pressure gauge

System E

EOX includes a P-014 hydraulic bench pump (0 to 10000 psi for oil)

Pump system F, Crystal M1 digital pressure gauge

System F

FOV includes a T-1 hydraulic bench pump (0 to 15000 psi for oil)

FWV includes a T-1 hydraulic bench pump (0 to 15000 psi for water)

Pump system G, Crystal M1 digital pressure gauge

System G

GOX includes a GaugeCalHP hydraulic comparator (0 to 15000 psi for oil)

GWX includes a GaugeCalHP hydraulic comparator (0 to 15000 psi for water)

Pump system H, Crystal M1 digital pressure gauge

System H

HOX includes a T-975 gas operated pump (-25 inHg to 580 psi / -0.91 to 40 bar) and a T-620H hydraulic hand pump (from 0 to 5000 psi / 350 bar)

parts

5203 suitable for XP2i, M1, 30 series and HPC40 magnetic sling

3436 digital pressure gauge protective sleeve (including) - Skydrol compatible elastic protective sleeve, can enhance the impact resistance.

3009 rigid portable box - egg box foam.

2888 wind and rain hard portable box - die - cutting foam